Broadcast DPS ES-2200 Manuel de l'opérateur télécharger pdf (Page 44)

Personal Video Routing Switcher

Connectors

FIGURE 4-11: Personal Video Routing Switcher I/O

Connections

INPUTS

4X1 SWITCHING MATRIX INPUTS

The inputs to the 4x1 switching matrix come fro m the four BNC inputs (Figure 4-11) and are AC coupled into

the board. A jumper header is provided at each input to allow for clamping of the input video signal (DC restorer). If

clamping is desired for any of the BNC video inputs, install a jumper in the desired header location (AHE5, AHE6,

AHE7, and AHE8). (Figure 4-12)

8X1 SWITCHING MATRIX INPUTS

The inputs to the 8x1 switching matrix come from the card edge connector (Figure 4-12). They cannot be used

when the RS-2800 is installed in an ES-2200 Expansion System.

REMOTE INPUT (RJ-14)

4x1 VIDEO INPUT #1

4x1 VIDEO INPUT #2

4x1 VIDEO INPUT #3

4x1 VIDEO INPUT #4

BNC VIDEO OUTPUT

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 69 70

Pas de commentaire

Broadcast DPS ES-2200 Manuel de l'opérateur Page 44